Projects de Recherche

11 Cintrage

11D-89/15 PART III - A Floor Construction with Rectangular Hollow Section Beams for offshore Structures (31/12/1989)
Auteur: Delft University
Personne: J. H. Reusink / A. Aantjes / P. G. F. Bosman / J. Wardenier
Langue: English

11D-89/15 PART II - A Deck Construction made with Rectangular Hollow Section beams for Offshore Structures (31/12/1989)
Auteur: Delft University
Personne: P. G. F. Bosman / A. Auntjes / A. M. Gresnigt / J. Wardenier
Langue: English

11D-89/15 PART IV A Floor Construction with Rectangular Hollow Section Beams for offshore Structures (31/12/1989)
Auteur: Delft University
Personne: R. S. Puthli / J. H. Reasint / J. Wardenie
Langue: English

11D-89/15 PART I - A Deck Construction made with Rectangular Hollow Section beams for Offshore Structures (31/12/1989)
Auteur: Delft University
Personne: P. G. F. Bosman / A. Auntjes / A. M. Gresnigt / J. Wardenier
Langue: English

11C-88/14 Minimum bending radii for square and Rectangular Hollow Sections (31/12/1988)
Auteur: Windsor University
Personne: J. B. Kennedy
Langue: English

11Bt-85/2 Cold bending of large size (100 mm and over) rectangular and square HSS - Theoretical aspects (31/12/1985)
Auteur: Windsor University
Personne: J. B. Kennedy / M. M. Seddeik
Langue: English

11A-79/18 Plastic behaviour of Hollow Structural Sections - Critical Buckling Strains of Round Tube in Flexure - The behaviour of SHS with implication (31/12/1979)
Auteur: McMaster University
Personne: R. M. Korol / J. Hudoba
Langue: English

11B-78/12 Determination of Minimum Radii for Cold Bending of Square and Rectangular Hollow Structural Sections (31/12/1978)
Auteur: Windsor University
Personne: F. S. Brady
Langue: English / French