Research

Much current CIDECT research activity is targeted at completing the body of knowledge which surrounds the structural behaviour of steel Structural Hollow Sections, and at interpreting and implementing this fundamental research.

A new phase of research has now opened which is directly concerned with providing practical, economical and labour saving design solutions.

All the work which is sponsored by CIDECT is made available to engineers, architects and students, world wide, through a range of research papers, software, design and architectural publications.

If you require detailed information please do not hesitate to contact us.

1A-5/04, Welding in corners of cold formed RHS (2004-01-01)

Location: Karlsruhe University & BAM,Berlin
Person: R.L./Rautaruukki, W.S/voestalpine, R.S.Puthli
Language: English

1B-2/03 Notch toughness of cold formed holow sections (2002-03-01)

Location: Toronto University
Person: N.Kosteski, J.A.Packer, R.S.Putli
Language: English

2X-1/10, Resistance and stability of structural members with hollow sections under combined compression and member (2010-07-19)

Location: Liege University and Feldman + Weynand
Person: L. Ly, J-P. Jaspart, K. Weynand
Language: English

2W-1/03 & 03.P.03, Hollow section columns embedded in concrete (2003-12-01)

Location: Munich University
Person: O. Bucak, R. Puthli
Language: English

2V-2/01, Plastic design of cold formed RHS sections (2001-12-01)

Location: Sydney University
Person: T. Wilkinson, G.J. Hancock
Language: English

2T-2/99, Buckling behaviour of hot formed SHS in high strength steel (1999-02-01)

Location: Liege and Aachen Univ.
Person: G. Sadlechek, J. Rondal, P. Boeraeve, B. Kunn
Language: English

2S-2/98, Plastic design of cold formed RHS sections (1998-12-01)

Location: Sydney University
Person: T. Wilkinson, G.J. Hancock
Language: English

2R-2/96 Buckling behaviour of a new generation of cold formed hollow sections (1996-12-31)

Location: Liege and Aachen University
Person: G. Sedlacek, J. Rondal, P. Boeraeve, N. Stranghoner, R. Schneider, D. Grotmann
Language: English

2P-2/95, Rotation capacity of hollow beam sections (1995-12-01)

Location: Liege University
Person: A. D. Hernancourt
Language: English

2M-92/2, Inventory of the research of hollow sections carried out in the stability field (1992-12-31)

Location: Liege University
Person: J. Rondal
Language: English

2Q-23/95, CIDECT design guide for concrete filled hollow section columns under static and seismic loading (1991-12-01)

Location: Bochum University
Person: R. Bergmann, C. Matsui, C. Meinsma, D. Dutta
Language: English

2L-86/9, Comparative study of different measuring methods of residual stresses in steel hollow sections (1986-12-31)

Location: Liege University
Person: J. P. Grimault, J. Rondal
Language: English

2K-83/14, Buckling tests on eccentrically loaded tubes in thin walled hollow sections (1983-12-31)

Location: Paris, Liege University
Person: J. P. Grimault, A. Plumier, J. Rondal
Language: French

2J-81/13, Columns of RHS clamped in concrete foundations (1981-12-01)

Location: Karlsruhe University
Person: F. Mang
Language: English

2H-79/19, Interaction overall: local buckling (1979-12-31)

Location: Liege University
Person: M. Branham, J. D. Grimault, J. Rondal
Language: French

2J-79/16, End fixity of RHS columns (1979-12-01)

Location: Karlsruhe University
Person: F. Mang
Language: German/English

2G-78/7, local buckling in steel hollow sections (1978-12-31)

Location: Cambridge University
Person: J. B. Dwight
Language: English

2F-78/10,An experimental investigation of the behaviour of cold formed stress relieved hollow structural steel section (1978-10-01)

Location: Toronto University
Person: J. J. Salvarinas, D. Barber, D.C. Birkemoe
Language: English

2D-76/40 Buckling strength of hot finished SHS (1976-10-01)

Location: Corby
Person: N. F. Yeomans
Language: English

2E, Buckling tests on cold formed SHS (thick walled) (1976-03-01)

Location: Liege, Milan
Person: J. d. Huart
Language: French

2G-75/3, Local buckling rules for RHS (1975-12-31)

Location: Cambridge University
Person: J. B. Dwight, C. D. Bradfield
Language: English

2D-75/2, Buckling tests on seamless and welded hot finished tubes (1975-10-01)

Location: Corby
Person: J. d Huart
Language: French

2C-73/23;74/18A/B/C/E, Complementary buckling tests on cold formed HS (1974-12-31)

Location: Liege University
Person: P. Guiaux
Language: –

2B-72/28, Buckling tests on square and circular hollow sections (1972-10-01)

Location: Liege University
Person: P. Guiaux
Language: French & English

2A, Buckling tests for ECCS (Annexes 1 & 2) (1971-12-01)

Location: Belgrade University
Person: B. Zaric
Language: French

2A-71/10(part5), Comments on the theoretical buckling investigations of structural members as encountered in practice (1971-10-01)

Location: Belgrade University
Person: J. Foucriat
Language: English

2A-71/6(part4) determination of the elastic limits for the buckling analysis (1971-10-01)

Location: Belgrade University
Person: A. Carpena
Language: English

2A-71/4(part2), Buckling tests and statistical assessment of the results (1971-04-01)

Location: Belgrade University
Person: J. Jacquet
Language: English

2A-71/2, Experimental basis for the European buckling curves (1971-01-01)

Location: Belgrade University
Person: D. Sfintesco
Language: English

2B-70/6, Cold working effect in the corner areas of cold formed RHS (1970-12-31)
2B-69/23, Cold working effects in corner areas of cold formed RHS (1970-10-02)

Location: Liege University
Person: P. Guiaux, M. Dzulynski
Language: French

2A-70/29(part3) Theoretical basis for the European buckling curves (1970-10-01)

Location: Belgrade University
Person: H. Beer, G. Schultz
Language: English

3K-90/3 Effective lengths of Tubular Lattice Girder Members – Statistical Tests (1990-12-31)

Location: Liege University
Person: J. Rondal
Language: English

3K-89/9E Effective lengths of Tubular Lattice Girder Members – Statistical Tests (1989-12-31)

Location: Liege University
Person: J. Rondal
Language: English

3K-89 Proposal of a calculation method to use in EC3 Statistical evaluation of the available test results (1989-12-31)

Location: Aachen
Person: G. Sedlacek / D. Grotmann
Language: English

3K-88/9 Effective lengths of Tubular Lattice Girder Members – Statistical Tests (1988-12-31)

Location: Delft University
Person: H. de Jong / R. F. Becque
Language: English

3J-86/13 The effect of joint rigidity on the buckling behaviour of a member in compression (1986-12-31)

Location: Delft University
Person: H. de Jong / R. F. Becque
Language: English

3J-85/12 Influence of joint rigidity on the buckling behaviour of a member in compression (1985-12-31)

Location: Delft University
Person: H. de Jong / R. F. Becque
Language: English

3J-84/4 Influence of joint rigidity on the buckling behaviour of a member in compression (1984-12-31)

Location: Delft University
Person: H. de Jong / J. L. van Leeuwen / P. Zoetemeijer
Language: English

3H-82/9 Effective lengths of chord members in spatial structures (1982-12-31)

Location: Liege University
Person: J. Rondal / F. Thonard
Language: English/French

Effective lengths of lattice girder members – Monograph no. 4 (1981-12-31)

Location: –
Person: J. Mouty
Language: English, German, French

3F-77/9 Coefficient D encastrement Transversal Des Treillis (1977-12-31)

Location: Liege University
Person: –
Language: French

3A-74/13 Effective length factors for end-plated web members in tubular trusses (1974-01-01)

Location: Manitoba University
Person: G. A. Morris / R. M. Muzyk
Language: English

3E/b-73/12/F2 Complementary tests on lattice girders with investigation of torsional fixity joints (1973-12-31)

Location: Liege University
Person: –
Language: French

3F/c-73/13/F3 c-Treillis carrees sur membrures carrees (1973-12-31)

Location: Liege University
Person: –
Language: French

3F/a-73/13/F1 Fixity tests – Encastrement Transversal Des Barres De Treillis Sur Membrure: a-Treillis ronds sur membrures rondes (1973-12-31)

Location: Liege University
Person: –
Language: French

3F/b-73/13/F2 b-Treillis ronds sur membrures carrees (1973-12-31)

Location: Liege University
Person: –
Language: French

3A-69/1 Effective lengths for compression members in lattice girders (1970-12-31)

Location: Liege University
Person: S. Baar
Language: French

3C-304/67 Effective length investigation according to Mr Lazards method (1970-12-31)

Location: Valencienne
Person: J. Mouty
Language: English/French

3E/c-73/12/F2 Complementary tests on lattice girders with investigation of torsional fixity joints (1970-12-31)

Location: Liege University
Person: –
Language: French

3E/a-73/12/F1 Complementary tests on lattice girders with investigation of torsional fixity joints (1970-12-31)

Location: Liege University
Person: –
Language: French

3D/65 / 68 (832) Lateral buckling of tubular latticed girders (1970-12-31)

Location: Haifa University
Person: E. Spira / E. Pollner
Language: English

3D-66 / (706) Behaviour of welded tubular structures with lightweight cladding under action of uplifting forces + Design Manual (1970-12-31)

Location: Haifa University
Person: J. Pairiot
Language: French

3D-66 / (706) Behaviour of welded tubular structures with lightweight cladding under action of uplifting forces + Design Manual (1970-12-31)

Location: Haifa University
Person: E. Spira / E. Pollner
Language: English

3E-3Eb/3Ec-75/12 Effective lengths of web members in CHS on chords in RHS (1970-12-31)

Location: Liege University
Person: –
Language: English

3E-3Eb/3Ec-75/12 3Eb-Knicklangen fur Fachwerke aus Rundhohlprofilen mit Gurten aus Viereck-Hohlprofilen (1970-12-31)

Location: –
Person: –
Language: German

3E-80E Buckling Length of Hollow Section Web Members Welded To Hollow Section Chords (1970-12-17)

Location: –
Person: J. P. Grimault
Language: English

3A-69/22F Longueurs De Flambement Des Elements Des Poutres Soudees a Treillis en Tubes (1970-09-30)

Location: –
Person: –
Language: French

3B-64 / 65 Tests on welded lattice girders with plastic design study (1970-01-31)

Location: Cambridge University
Person: I. M. Nitkin / J. B. Dwight
Language: English

4F-2/10, Strength and ductility of connections between tubular columns and flat slabs monotonic and cyclinc loading conditions (2010-06-30)

Location: Imperial College of London
Person: A. Elghazoulli
Language: English

4E-6/95 Load bearing capacity of composite hollow section columns filled with high strength concrete (1995-12-31)

Location: Imperial College of London
Person: A. Elghazoulli
Language: English

4C-73/11 Tests on joints between concrete filled columns and beams (1993-12-31)

Location: Liege University
Person: P. Guiaux
Language: English

4D-76/18 Joints between concrete filled columns and beams – double angle (1976-12-31)

Location: Liege University
Person: J. d Huart
Language: English

4B-75/1 Complementary tests on concrete filled columns (1975-12-31)

Location: Liege University
Person: J. Janss
Language: French

4C-75/3 Tests on joints between concrete filled columns and beams (1975-09-14)

Location: Liege University
Person: P. Guiaux / J. Jones
Language: French

4C-74 Tests on joints between concrete filled columns and beams (1974-12-31)

Location: Liege University
Person: P. Ansourian
Language: English

4A-72 Triaxial Stresses in Short circular concrete-filled tubular steel columns (1972-12-31)

Location: Imperial College London University
Person: H. K. Sen
Language: English

4C-72/16 Tests on joints between concrete filled columns and beams (1972-12-31)

Location: Liege University
Person:
Language: French

4A-70/42 Comportement au flambement de colonnes remplies de béton (1970-12-31)

Location: Liege University
Person: P. Guiaux / J. Jones
Language: French

5CB-3/14, Uniformly Heated Truss (2014-10-13)

Location: University of Manchester
Person: Y. C. Wang, E. Ozyurt, T. Mustard
Language: English

5CC-6/13, New Chord Load Function (2013-11-01)

Location: University of Karlsruhe
Person: T. Ummenhofer, A. Lipp
Language: English

5CD-7/13, Survey of Solutions for Seismic Design of Hollow Section Connections (2013-07-01)

Location: Imperial College London, University of Toronto
Person: A. Y. Elghazouli, J. A. Packer, T. Mustard, G. Iglesias
Language: English

5CA-7/12, Comprehensive Discussion of Results of Available Research on the Effect of Tensile Chord Stresses on the Load Capacity of Unstiffened, Welded Hollow Section Joints (2007-07-01)

Location: University of Karlsruhe
Person: T. Ummenhofer, A. Lipp, G. Iglesias
Language: English

5BY-5/11, Design charts for RHS and CHS Weld sizes for steel up to S460 (2011-07-31)

Location: Competence Centre for Tubes and Hollow Sections
Person: S. Herion, O. Fleischer, M. Schneider, O. Josat
Language: English

5BX-4/11, Static strength of RHS K joints with holes for galvanization (2011-07-31)

Location: University of Oviedo
Person: M.A. Serrano, C. López-Colina, J.J. del Coz, G. Iglesias, J. González, J.J. del Campo
Language: English

5BT-1/11, Adaptation and extension of the design formulae for joints made of high strength steels up to S690 which are valid for cold-formed and hot-rolled sections (2011-07-19)

Location: Karlsruhe Institute of Technology, Munich University of Applied Science
Person: R. Puthli, Ö. Bucak, S. Herion, O. Fleischer, A. Fischl, O. Josat
Language: English

5BS-3/10, Branch plate-to-Circular Hollow Structural Section Connections (2010-07-14)

Location: University of Toronto
Person: A.P. Voth, J.A. Packer
Language: English

5BU-7/07, Effect of chords loads on the stregth of RHS uniplanar gap K-joints (2007-01-27)

Location: Delft University
Person: J. Wardenier
Language: English

5BN-3.04 & APPENDIX Modified Design Equations for RHS-K-Joints with 100% overlap (2004-12-31)

Location: Delft University
Person: Y. Chen / D. K. Liu / J. Wardenier
Language: English

5BQ-5_04 INTERIM – Design Guide for CHS Joints Under Predominantly Static Loading (2004-12-31)

Location: Sojo University
Person: Y. Kurobane
Language: English

5BR-6_04 INTERIM – Design Guide for RHS Joints Under Predominantly Static Loading (2004-12-31)

Location: Liege University
Person: K. Weynand / J. P. Jasport / L. Ly
Language: English

5BP-6/03 INTERIM 1 – Development of a Full Consistent Design Approach for Bolted and Welded Joints in Building Frames and Trusses between Steel Member (2003-12-31)

Location: Liege University
Person: J. P. Jasport / K. Weynand / R. Klinkhammer
Language: English

5BK-4/03 (REVISED) New chord load function for Circular Hollow Section Joints (2003-12-31)

Location: Delft University / Kumamoto University
Person: G. J. van der Vegie / D. K. Liu / Y. Makino / J. Wardenier
Language: English

5BJ-3/02 Multiplanar RHS K-Joints (2002-12-31)

Location: Karlsruhe University
Person: H. Stauf / J. Krampen
Language: English

5BH-4/99 Plate connections to RHS columns at brace points (1999-12-31)

Location: Toronto University
Person: J. A. Packer / N. Kosteski / J. J. Cao
Language: English

5AX-7/98 The Static Strength of I-beam to Circular Hollow Section Column Connections (1998-12-31)

Location: Aachen University
Person: G. D. de Winkel
Language: English

5AX-98/12 REP 2 The Static Strength of I-beam to Circular Hollow Section Column Connections (1998-12-31)

Location: Delft University
Person: G. D. de Winkel
Language: English

5BD-9/98 Static strength of high strength steel tubular joints (Chap 1-3 / 4 / 5-6 / 7-10) (1998-12-31)

Location: Delft University-TNO Bomel
Person: G. Noodhoek / A. Verheul
Language: English

5AX-6/98 REP 1 The Static Strength of I-beam to Rectangular Hollow Section Column Connections (1998-12-31)

Location: Delft University
Person: L. H. Lu
Language: English

5BF-10/98 Analysis of existing and new data for multiplanar KK joints with CHS (1998-12-31)

Location: Kumamoto University
Person: Y. Kurobane / Y. Makino
Language: English

BG-11/98 Static strength of Uniplanar and multiplanar connections in RHS (1998-12-31)

Location: Delft University
Person: Y. Yu
Language: English

5BB-8/98 Rotational stiffness of welded RHS beam-to-column connections (1998-12-31)

Location: Aachen University
Person: D. Grotmann / G. Sedlacek
Language: English

5BE-10/96 L Joints made of Circular Hollow Structure (1996-12-31)

Location: Karlsruhe University
Person: J. Krampen
Language: English

5AQ-5-96 Use of Cold-formed RHS in Welded Structures, Subject to Low Ambient Temperatures (1996-12-31)

Location: Lappeenranta University
Person: E. J. Niemi
Language: English

5AW-8/95 The Development of Design Methods for The cost effective Application of Multi-planar Connections: Phase II static strength of RHS joints (1995-12-31)

Location: Delft University
Person:
Language: English

5AU-8/94 Reinforced Branch Plate-To-RHS Connections In Tension and Compression (extension to 5AK) (1994-12-31)

Location: New Brunswick University
Person: S. Guravich
Language: English

5BC-13/94 (INTERIM) Beam-CHS column joints with reinforced concrete techniques (1994-12-31)

Location: CREA Consortium Massa (ITALY)
Person: S. Pustorino
Language: English

5AW-10/93 (TS & MD) The Development of Design Methods for The cost effective Application of Multi-planar Connections: Phase II static strength of RHS (1993-12-31)

Location: Tubes & Pipes Corby
Person:
Language: English

5AS-93/8 Study of the behaviour under static loads of welded triangular and rectangular lattice girders made with CHS (1993-12-31)

Location: Liege University
Person: J. Rondal
Language: English

5AV-26/92 Design Criteria For Concrete-Filled HSS Joints (1992-12-31)

Location: Toronto University
Person: J. A. Packer
Language: English

5AW-92 Phase II, Final Report, Part 1: Experimental and Numerical investigation on the Static Strength of Multiplanar Welded DX- and X-joints in R.H.S (1992-12-31)

Location: Delft University
Person: C. H. M. de Koning D. K. Liu / R. S. Puthli / J. Wardenier
Language: English

5AY-6/92 Beam to Column Connections Between Tubular and Open Section (1992-12-31)

Location: Nottingham University
Person: M. Saidani / D. A. Nethercot
Language: English

5BF – Monty & Rondal – Note on report on K-K joints (1992-12-31)

Location: Monty & Rondal
Person: J. C Paul
Language: English

5BF – Monty & Rondal – Note on report on K-K joints (1992-12-31)

Location: Liege University
Person: J. Mouty / J. Rondal
Language: English

5AN-27/92 Design Rules for Welds in RHS K, T, Y and X Connections (1992-12-31)

Location: Toronto University
Person: G. Frater / J. Wardenier
Language: English

5AV-13/91 Concrete filled SHS T and K joints (1991-12-31)

Location: Toronto University
Person: J. A. Packer / W. W. Kenedi
Language: English

5AV-90/9 Concrete-Filled Hollow Structural Sections under Transverse Compression (1990-12-31)

Location: Toronto University
Person: J. A. Packer / C. Fear
Language: English

5AT-90/21 Separated Double chord RHS Warren Truss Design Program – Users Manual (1990-12-31)

Location: McMaster University
Person: R. Luft / R. M. Korol
Language: English

5AH2/5AP-90/20 5AH2 – Study of Maximum Permissible Weld Gaps in Connections with Plane End Cuttings (1990-12-31)

Location: Liege University
Person: J. Rondal
Language: English

5AR-90/10 The Influence of Multiplanar Loading on the Strength and Stiffness of Tubular Joints (1990-12-31)

Location: Delft University
Person: T. J. van den Broek / R. S. Puthli / J. Wardenier
Language: English

5AN/2-90/7 EXTRA – Design of Fillet Weldments For Hollow Structural Section Trusses (1990-12-31)

Location: Toronto University
Person: G. Frater / J. A. Packer
Language: English

5AN/2-90/7 Design of Fillet Weldments For Hollow Structural Section Trusses (1990-12-31)

Location: Toronto University
Person: G. Frater / J. A. Packer
Language: English

5AL-90 Beam/Column behaviour of Steel Tubes filled with High Strength Concrete (1990-12-31)

Location: University of British Columbia
Person: H. G. L. Prion / J. Boehme
Language: English

5AH2/5AP-88-10 5AH2 – Study of Maximum Permissible Weld Gaps in Connections with Plane End Cuttings 5AP – S (1988-12-31)

Location: Liege University
Person: J. Rondal
Language: English

5AK-88 Performance of Connections Between HSS Columns and W Shape Beams (1988-12-31)

Location: Hamilton Ontario
Person: J. I. Dawe / C. K. Liew
Language: English

5AQ-88/13 Behaviour of Rectangular Hollow Section K-Joints at low temperature (1988-12-31)

Location: Lappeenranta University
Person: E. Niemi / J. Lehtinen / I. Sorsa
Language: English

(5AD) EUR 9430 EN – Development of design recommendations for Welded Joints of Steel Constructions, made with Structural Hollow Sections and with Stru (1988-12-31)

Location: British Steel / Delft University
Person: T. W. Giddings / N. F. Yeomans / J. Wardenier
Language: English

(5AD) EUR 9430 EN – Development of design recommendations for Welded Joints of Steel Constructions, made with Structural Hollow Sections and with Stru (1988-12-31)

Location: British Steel / Delft University Person: T. W. Giddings / N. F. Yeomans / J. Wardenier Language: English

5AM-88/4E Static Strength of Circular Hollow Section to Plate Connections (1988-12-31)

Location: Karlsruhe University Person: D. Dutta / F. Mang Language: English

5W2-88/1E A Spreadsheet for HSS Triangular Truss Joint Design (1988-12-31)

Location: Montreal University Person: D. Bauer / R. G. Redwood Language: English

5AM-87/3 (CHS) + 5AM-87/2 (RHS) Static Strength of Circular Hollow Section to Plate Connections (1987-12-31)

Location: Karlsruhe University Person: D. Dutta / F. Mang Language: English

5AH2/5AP-87-8E 5AH2 – Study of Maximum Permissible Weld Gaps in Connections with Plane End Cuttings (1987-12-31)

Location: Liege University Person: J. Rondal Language: English

5AN-87/1 Weldment Design for Hollow Structural Section Joints (1987-12-31)

Location: Toronto University Person: G. Frater / J. A. Packer Language: English

5W2-87/11E Triangular Trusses Fabricated from Rectangular Hollow Sections (1987-12-31)

Location: Montreal University Person: D. Bauer Language: English

5AN-86/2 Weldment Design for Hollow Structural Section Joints (1986-12-31)

Location: Toronto University Person: G. Frater / J. A. Packer Language: English

(5AD) EUR 9453 DE – Entwicklung von Konstruktionsempfehlungen fur Geschweisste Knoten Aus Stahlhohlprofilen (T- und X-Knoten) (1986-12-31)

Location: Mannesmann Person: D. Dutta Language: German

5AH-85/1E & F Flat cutting of tube ends for joining circular hollow sections (1985-12-31)

Location: Liege University Person: V. A. Tuan / J. Rondal Language: English & French

(5AD) EUR 9461 FR – Perfectionnement Des Methodes de Conception et de Calcul des Assemblages Soudes de Profils Creax sur Profils de Type H en Acier (1985-12-31)

Location: Cometube Person: L. Petit / Lachal / J. Mouty / J-M. Aribert Language: French

(5AD) EUR 9430 EN – Development of design recommendations for Welded Joints of Steel Constructions, made with Structural Hollow Sections and with Stru (1985-12-31)

Location: Delamine Person: F. Fumagalli / A. Pugno Language: Italian / French / English

5AL-85/4E Simple Beam Connections for Concrete Filled Steel Tubes (1985-12-31)

Location: McGill University Person: E. Dunberry / D. Leblanc / R. G. Redwood Language: English

5W2-84/3E Tests of HSS double T-Joints (1984-12-31)

Location: Montreal University Person: D. Bauer / R. G. Redwood Language: English

5AD-84/16 Improvement of Design & Calculation Methods for Steel Hollow Sections to H type Section Welded Joints (1984-12-31)

Location: Karlsruhe University Person: J. Mouty Language: English

5AD-84/12 The development of recommendations for the design of welded joints between steel structural hollow sections (T- & X- type joints) (1984-12-31)

Location: Karlsruhe University Person: F. Mang / O. Bucak / F. Wolfmuller Language: English

5AD-84/11Development of design recommendations for SHS joints (general Programme) (1984-12-31)

Location: BSC Tubes Division Person: T. W. Giddings Language: English

(5AD) Stevin Rep 6-84-18 – The Static Strength of Welded Joints Between Structural Hollow Sections or Between Structural Hollow A sections and H-Secti (1984-12-31)

Location: Delft University Person: C.H.M. de Koning / J. Wardenier Language: English

(5AD) Stevin Rep 6-84-19 – Part 2: Joints Between Rectangular Hollow Sections (1984-12-31)

Location: Delft University Person: C.H.M. de Koning / J. Wardenier Language: English

(5AD) Stevin Rep 6-84-20 – Part 3: Joints Between Structural Hollow Section Bracings and a H-section Chord (1984-12-31)

Location: Delft University Person: C.H.M. de Koning J. Wardenier Language: English

5AF-84-5 The Local Strength of Welded RHS T-Joints Subjected to Bending Moment (1984-12-31)

Location: Kobe University Person: M. Tabuchi / H. Kanatani / T. Kamba Language: English

5AJ-84/9 Interpretation of CIDECT Monograph 6 on welded structural hollow section connections (1984-12-31)

Location: Toronto University Person: J. Packer Language: English

5AD-84/23 Development of design recommendations for SHS joints (general Programme) (1984-12-31)

Location: BSC Tubes Division Person: T. W Giddings / N. F. Yeomans Language: English

5AK-84/8 Semi-rigid Connection Between a W and an HSS Column (1984-12-31)

Location: New Brunswick University Person: J. l. Dawe / G. Y. Grondin Language: English

5AC-84/7 Behaviour of Bolted Connections for Tubular Hollow Structural Section Truss Joints (1984-12-31)

Location: Manitoba University Person: G. Morris / M. Chislett Language: English

(5AD) EUR 9462 EN – The Development of Recommendations for the Design of Welded Joints Between Steel Structural Hollow Sections and H-Sections (1984-12-31)

Location: British Steel Person: T. W. Giddings Language: English

5V-83/3 The behaviour of RHS Double Chord Warren Trusses and Aspects of Design (1983-12-31)

Location: McMaster University Person: R. M. Korol Language: English

5AD The Development of Recommendations for the design of welded joints between steel structural hollow sections (T and X type joints) (1983-12-31)

Location: Karlsruhe University Person: D. Dutta Language: German / English

5AG-83/5 Beam – Column Welded Stud Connections (1983-12-31)

Location: Liege University Person: R. Maquoi / X. Naveau / J. Rondal Language: English/French

5K-83/2 Designing HSS Trusses with End-Cropped Webs (1983-12-31)

Location: Manitoba University Person: G. A. Morris Language: English

5AF2-82/2 Bending tests on T joints of RHS chord and RHS branch (1982-12-31)

Location: Kobe University Person: H. Kanatani / K. Fujiwara / M. Tabuchi / T. Kamba Language: English

5V/2-82_7 An Investigation into the Behaviour of Double Chord HSS Trusses (1982-12-31)

Location: Hamilton University Person: R. M. Korol / F. A. Mira / E. T-C Chiu Language: English

5Jt-81/8 Elastic-Plastic Finite Element Analysis of Rectangular Hollow Section T-Joints (1981-12-31)

Location: Hamilton University Person: R. M. Korol / F. A. Mirza / L. Elhifnawy Language: English

5W-81/1 Welded Joints for Triangular Trusses (1981-12-31)

Location: Montreal University Person: R. G. Redwood / P. J. Harris Language: English

5K-81/9 Statical Behaviour of Cropped-Web Joints for Trusses with round Tubular Members (1981-12-31)

Location: Manitoba University Person: G. A. Morris / J. B. Ciwko Language: English

5V/2 INTERIM Double Chord HSS Truss Test Program (1980-12-31)

Location: Hamilton University Person: R. M. Korol Language: English

5AC-80/11 Experimental Study of Bolted Joints for Round Hollow Structural Sections (1980-12-31)

Location: Manitoba University Person: P. E. Hill-Corroll / S. S. Koh / G. A. Morris Language: English

5AF-80/15 Bending Tests on T joints of RHS chord and RHS or H-shape branch (1980-12-31)

Location: Kobe University Person: H. Kanatani / K. Fujiwara / M. Tabuchi / T. Kamba Language: English

5K-80/12 Influence of chord Preload on behaviour of Tubular Truss Joints with Cropped Webs (RHS) (1980-12-31)

Location: Manitoba University Person: C. Faing / G. A. Morris Language: English

5X-80/14 Investigations of Weld Imperfections in Butt-Welds of Structural Hollow Sections (SHS) (1980-12-31)

Location: Karlsruhe University Person: F. Mang / G. Steidl / O. Bucak Language: English

5V/1-80/7 Double Chord HSS Trusses Phase 1. Tests on Isolated Joints (1980-12-31)

Location: Hamilton University Person: R. M. Korol / M. A. Chidiac Language: English

5V-79/10 Double Chord Square H.S.S. Joints (1979-12-31)

Location: McMaster University Person: R. M. Korol / M. A. Chidiac Language: English

5Y-79/13 The Static Strength of R.R-Joints with large b/B-Ratio (1979-12-31)

Location: Tokyo University Person: B. Kato / I. Nishiyama Language: English

5Qg-79/5 Tests on welded Joints in complete girders made of square hollow sections (1979-12-31)

Location: Delft University Person: C.H.M. de Koning / J. Wardenier Language: English

5K-79/3 Statical behaviour of cropped-web Joints in Tubular Trusses (Rectangular Chords) (1979-12-31)

Location: Manitoba University Person: N. Thiensiripipat / G. A. Morris / R. B. Pinkney Language: English

5Z-79/6 Behaviour of Rigid Frame Connections Subjected to Horizontal Force (1979-12-31)

Location: Tokyo University Person: B. Kato / I. Nishiyama Language: English

5U-79/2 Use of the Nottingham University / CIDECT computer programs for the analysis of CHS or RHS to RHS joints (1979-12-31)

Location: – Person: J. A. Packer Language: English

5T-78/6(4) Investigations into the Strength and Stability of Welded Construction Elements Consisting of Rectangular Hollow sections (1978-12-31)

Location: Karlsruhe University Person: F. Mang Language: German

5T-78/6(5) Investigations into the Strength and Stability of Welded Construction Elements Consisting of Rectangular Hollow sections (1978-12-31)

Location: Karlsruhe University Person: F. Mang / O. Bucak / K. Bremer Language: English

5U-78/19 Extension to Prog: Theoretical Behaviour and Analysis of Welded Steel Joints with RHS Chords (1978-12-31)

Location: Nottingham University Person: J. A. Packer / G. Davies / M. G. Coutie Language: English

5Q-78/4 The Static Strength of Welded Lattice Girder Joints in Structural Hollow Sections (1978-12-31)

Location: Delft University Person: J. Wardenier / J. W. B. Stark Language: English

5R Joint tests – high tensile steel (G+E) (1978-12-31)

Location: Karlsruhe University Person: F. Mang / O. Bucak / T. Hummel Language: English

5R-78/5(1) Joint tests – high tensile steel (G+E) (1978-12-31)

Location: Karlsruhe University Person: F. Mang Language: English

5R-78/5(1&2) Joint tests – high tensile steel (G+E) (1978-12-31)

Location: Karlsruhe University Person: F. Mang Language: German

5Q-77/8 Investigation into the Static Strength of Welded Warren Type Joints Made of Circular Hollow Sections (1977-12-31)

Location: Delft University Person: J. Wardenier / C.H.M. de Koning Language: English

5Q-77/23 Investigation into the Static Strength of Welded Joints with Three Bracings made of R.H.S or C.H.S (1977-12-31)

Location: Delft University Person: J. Wardenier / C.H.M. de Koning Language: English

5Q-77/12 Behaviour of Axially Loaded K- and N-Type Gap Joints with Bracings of Structural Hollow Sections and an I-Profile as Chord (1977-12-31)

Location: Delft University Person: J. Wardenier / C.H.M. de Koning / A. A. van Douwen Language: English

5Q-77/13 Behaviour of Axially Loaded K- and N-Type Gap Joints with Bracings of Rectangular Hollow Sections and a Channel Profile as Chord (1977-12-31)

Location: Delft University Person: J. Wardenier / C.H.M. de Koning / J de Back Language: English

5N-77/15 Tests on joints with “H” section chord (1977-12-31)

Location: Paris Person: R. Bailly Language: French

5N-77 Study of the joints between hollow and open sections (1977-12-31)

Location: Paris Person: M. Tournay Language: French

5FC-77/31 The behaviour or Welded Joints in Complete Lattice Girders with RHS Chords (Tests on Isolated Joints) + (Photographs) (1977-12-31)

Location: Corby Person: – Language: English

Investigation into the Static Strength of Welded Lattice Girder Joints in Structural Hollow Sections PART 1 (1976-12-31)

Location: Delft University Person: J. Wardenier / C.H.M de Koning Language: English

5Q-76/20 Investigation into the Static Strength of Welded Lattice Girder Joints in Structural Hollow Sections PART 2 (1976-12-31)

Location: Delft University Person: J. Wardenier / C.H.M. de Koning Language: English

5M-76/8 Failure load tests on large size RHS warren joints (1976-12-31)

Location: Duisburg Person: H. Hohl Language: English

5J-76/16 Vierendeel Trusses with Hollow Structural Sections (1976-12-31)

Location: Hamilton University Person: M. El – Zanaty / R. M. Karol Language: English

5S-76/33 Rig comparison tests (welded joints) (1976-12-31)

Location: TNO, Delft, Corby Person: J. Wardenier / C.H.M. de Koning Language: English

5K-75/9 Statical Behaviour of Cropped-End connections in Tubular Trusses (1975-12-31)

Location: Manitoba University Person: N. Thiensiripipat / G. A. Morris Language: English

5S-75/16 Welded Joints – Rig Comparison Tests (1975-12-31)

Location: Research Centre, Corby Person: D. Markarian Language: English

5L-74/16 Hollow Structural Sections Welded Joint Research (1974-12-31)

Location: Stelco Person: E. B. Gibson / R. M. Pastor Language: English

5D-72/29 Load Transmission in Cruciform tubular joints (1974-12-31)

Location: Paris Person: P. Davarpanah Language: English

5FP-74/11 – 3 PARTS Tests on full size girders (5FCO) (1974-12-31)

Location: Pïsa University Person: – Language: Spanish

5M-74/8G Failure load tests on large size RHS warren joints (1974-12-31)

Location: Duisburg Person: – Language: German

5M-74/15 Failure load tests on large size RHS warren joints (1974-12-31)

Location: Duisburg Person: H. Hohl Language: German

5F-74/3 The behaviour or Welded Joints in Complete Lattice Girders with RHS Chords (Tests on Isolated Joints) (1974-12-31)

Location: Corby Person: T. W. Giddings / M. Edwards Language: English

5M-74/15 Failure load tests on large size RHS warren joints (1974-12-31)

Location: Duisburg Person: H. Hohl Language: German

5G-74/1 Warren Joint Tests with Cold-Formed RHS (1974-12-31)

Location: Sheffield University Person: S. R. De S. Chandrakeerthy Language: English

5G-73/25/E2 The Investigation of the Material Properties in Cold-Formed SHS and their Importance (1973-12-31)

Location: Sheffield University Person: S. R. De S. Chandrakeerthy Language: English

5P-73/24/E trans Assessment of research reports on RHS joints (1973-12-31)

Location: Karlsruhe University Person: F. Mang Language: English

5G-73/25/E3 Theoretical Investigation (1973-12-31)

Location: Sheffield University Person: S. R. De S. Chandrakeerthy Language: English

5G-73/25/E1 Structural behaviour related to stress analysis of joints in cold-formed square hollow sections (1973-12-31)

Location: Sheffield University Person: S. R. De S. Chandrakeerthy Language: English

5EC-71/7 Research into the strength of welded lattice girder joints in structural hollow sections + (Photographs) (1971-12-31)

Location: Corby Person: J. Davie / T. W. Giddings Language: English

5ES-71/1E An investigation of the Strength of Ordinary and Stiffened Joints in Tubular Plane Frameworks (1971-12-31)

Location: Sheffield University Person: W. Eastwood / A. A. Wood / M. R. Shinouda Language: English

5M Additional – Failure load tests on large size RHS warren joints (1970-12-31)

Location: Duisburg Person: – Language: German

5A/64 Joints in large diameter tubes (G+E) (1970-12-31)

Location: Stuttgart Person: R. L. Strasse Language: English / German

5 BL Static behaviour of joints made of thin walled hot formed hollow sections (1970-12-31)

Location: Karlsruhe University Person: Combined with 5BI Language: Combined with 5BI

5M Failure load tests on large size RHS warren joints (1970-12-31)

Location: Karlsruhe University Person: – Language: German

5ES-70/38 Further tests on the Fatigue Behaviour of Welded Joints between Structural Hollow Sections (1970-12-31)

Location: Sheffield University Person: W. Eastwood / A. A. Wood / B.P. Opie Language: English

5C-70/39 The analysis of Stiffening Plate reinforcement of joints in tubular trusses (1970-12-31)

Location: Sheffield University Person: W. Eastwood / A. A. Wood / M. R. Shinouda Language: English

5C-70/37 An experimental investigation of joints in Rectangular Hollow Sections (1970-12-31)

Location: Sheffield University Person: W. Eastwood / A. A. Wood / C. Osgerby / B. L. Mee Language: English

5B/64 Full scale tests on lattice girders (E+F) (1970-12-31)

Location: St Remy Person: R. Delesques / G. Valbert / D. Sfintesco Language: English/French

5C-70/8 Recent research on joints in tubular structures (1970-12-31)

Location: Sheffield University Person: W. Eastwood / A. A. Wood Language: English

6L-6/12, Gap Analysis on Tubular Joints in Fire, Earthquake Resistance and Robustness (2012-11-12)

Location: University of Manchester, Imperial College, University of Liège
Person: Y. C. Wang, A.Y. Elghazouli, J.-P. Jaspart
Language: English

6J-9/10, Behaviour and design of semi-rigid beam-to-tubular column connections (2010-06-30)

Location: Imperial College of London
Person: A. Elghazoulli
Language: English

6F-13A/96 Flow Drill Jointing System Part 1 – Mechanical Integrity Tests (1996-12-31)

Location: British Steel Corby
Person: –
Language: English

6F-13B/96 Flow Drill Jointing System Part 2 – Structural Hollow Section connections (1996-12-31)

Location: British Steel Corby
Person: –
Language: English

6G-14A/96 Hollowfast and Hollowbolt system for Hollow Section Connections Interim Report (1996-12-31)

Location: Trent University/Corby
Person: –
Language: English

6G-14E/96 Hollow section connections using hollow-fast expansion bolts (1996-12-31)

Location: Trent University/Corby
Person: F. Occhi
Language: English

S2639 – (1-5) – HOLLOFAST REF – Results of Tension Tests on X-Joint Bolt Arrangements (1995-12-31)

Location: Trent University/Corby
Person: G. Banks
Language: English

6H-17/95 Nailing of tubes (1995-12-31)

Location: Toronto University
Person: J. A. Packer
Language: English

6D-16/94 Hollow section column/beam connections with flowdrilled holes (1994-12-31)

Location: Flowdrill B.V.
Person: –
Language: English

6G-19/94 (INTERIM) Hollow Section Connections using hollow-fast expansion bolts (1994-12-31)

Location: Trent University/Corby
Person: F. Occhi
Language: English

6E-16/93 Hollow section construction with simple bolted connections (1993-12-31)

Location: Karlsruhe University
Person: F. Mang / D. Dutta
Language: English

6C-88/6 Bolted beam/column moment connections (full moment) (1988-12-31)

Location: Tokyo University
Person: B. Kato
Language: English

6B-86/1 Tests on T-type Bolted Joints in hollow sections intended to transmit a moment (1986-12-31)

Location: Liege University
Person: L .Petit / A. Plumier / J. Rondal
Language: English

6A-69_9_I Bolted joints (1970-12-31)

Location: Italy
Person: F de Miranda
Language: Italy

6A-69_9_E Translation (806E) Bolted joints (1970-12-31)

Location: Italy
Person: F de Miranda
Language: English

6A-66 (Part 1-6) Studio Sui Collegamenti Bullonati Nelle Strutture in Carpenteria Tubolare (1970-12-31)

Location: –
Person: F de Miranda
Language: French

7Y-7/11, Extension of the fatigue life of existing and new welded hollow section joints (2011-07-31)

Location: Karlsruhe Institute for Technology
Person: T. Ummenhofer, S. Herion, P. Weidner, J. Hrabowski, M. Schneider, O. Josat
Language: English

7X-9/06 Fatigue of high strength cold-formed RHS (2006-09-01)

Location: Lappeenranta University
Person: J. Kokkonen / T. Björk
Language: English

7V-7/06 The fatigue behaviour of bird beak T-joints (2006-07-01)

Location: Delft University
Person: A. Romeijn / J. Wardenier
Language: English

7H-89/1E – Low cycle fatigue of welded structures (2006-01-17)

Location: Delft University
Person: A. Verheul / J Wardenier
Language: English

7U-9/04 Fatigue of high strength, thin walled, cold formed CHS joints (2004-12-31)

Location: Monash University
Person: F. Mashiri / X-L. Zhao / P. Grundy
Language: English

7V-8/04 The Fatigue behaviour of bird-beak T & Y joints (2004-12-31)

Location: Delft university
Person: A. Romeijn / J. Wardenier
Language: English

7W-3/04 INTERIM Fatigue of CHS end-to-end connections of different thickness (2004-12-31)

Location: Karlsruhe University
Person: J. Krampen / N. Genge
Language: English

7W-3/04 APP. Fatigue of CHS end-to-end connections of different thickness (2004-12-31)

Location: Karlsruhe University
Person: J. Krampen / N. Genge
Language: English

7U-9/03 + Appendix – Fatigue of cold-formed CHS joints (t<4mm) (2003-08-31)

Location: Monash University
Person: F. Mashiri / X-L. Zhao / P. Grundy
Language: English

7S-02/5 – L joints made of RHS and CHC under fatigue loading (2002-12-31)

Location: Karlsruhe University
Person: R. Puthli / J. Krampen
Language: English

7T-8/01 Fatigue of welded connections in high strength cold formed (2001-08-31)

Location: Monash University
Person: F. Mashiri / X-L. Zhao / P. Grundy / L. Tong
Language: Monash University

7R-23/98 Simplified design graphs for the fatigue design of (1997-12-31)

Location: Delft, Karlsruhe, Toronto Univ.
Person: A. M. Wingerde / J. A. Packer / J. Wardenier
Language: English

7P-19/96 The fatigue Behaviour of K-joints made of square hollow (1996-12-31)

Location: Delft/Toronto University
Person: A. M. Wingerde / J. A. Packer / J. Wardenier / D. Dutta
Language: English

7L-16/96 Fatigue behaviour of hollow section joints of high tensile (1996-12-31)

Location: Karlsruhe University
Person: H. Stauf / F. Mang / O. Bucak / S. Herion
Language: English

7M – Design guide for CHS and RHS welded joints under fatigue (1996-12-31)

Location: Aachen University
Person: –
Language: –

7Q-22/95 Hysteretic behaviour of composite lattice girders with RHS (1995-12-31)

Location: Kumamoto University
Person: K. Ogawa / Y. Kurobane
Language: English

7J-1/93 (Part 5) Fatigue Behaviour of Multiplanar Welded Hollow (1993-12-31)

Location: Delft, Karlsruhe
Person: D. Dutta
Language: English

7N-4/93 Fatigue behaviour of hollow section joints – Fracture (1993-12-31)

Location: Aachen University
Person: Aachen University
Language: English

7K-16/92 The Fatigue behaviour of T-joints between RHS loaded by an (1992-12-31)

Location: Aachen University
Person: A. M. van Wingerde / J. Wardenier / D. Dutta
Language: English

7J/92 (Part 4) Fatigue Behaviour of Multiplanar Welded Hollow (1992-12-31)

Location: Delft, Karlsruhe
Person: –
Language: English

7J/92 (Part 3) Fatigue Behaviour of Multiplanar Welded Hollow (1992-12-31)

Location: Delft, Karlsruhe
Person: A. Romeijn / E. Shahi / R. S. Puthli / J. Wardenier
Language: German

7J-15/92 (PART 1-3) – Fatigue strength of multiplanar welded (1992-12-31)

Location: Delft, Karlsruhe
Person: D. Dutta / J. Wardenier / C.H.M. de Koning / R.S Puthli
Language: French / English / German

7J/92 (Part 1) – Fatigue Behaviour of Multiplanar Welded Hollow (1992-12-31)

Location: Delft, Karlsruhe
Person: A. Romeijn / E. Shahi / R. S. Puthli / J. Wardenier
Language: English

7J/92 (Part 2) – Fatigue Behaviour of Multiplanar Welded Hollow (1992-12-31)

Location: Delft, Karlsruhe
Person: A. Romeijn / E. Shahi / R. S. Puthli / J. Wardenier
Language: English

7G-26/91 Investigation into the behaviour of Hollow Sections used as (1991-12-31)

Location: Bochum University
Person: K. D. Behtau / K. Roik
Language: English

7K-18/91The Fatigue behaviour of T-joints between RHS loaded by an (1991-12-31)

Location: Aachen University
Person: A. Verheul / A. M. Wingerde / J. Wardenier
Language: English

7K-90/14 Fatigue of Uni-planar Joints – T and X Joints Between (1990-12-31)

Location: Aachen University
Person: A. M. van Wingerde / J. Wardenier / D. Dutta
Language: English

7E/7F-89/5 Fatigue Strength of Welded, Unstiffened RHS Joints in (1989-12-31)

Location: Testing Centre in Europe
Person: D. Dutta / F. Mang / J. Wardenier
Language: English

7H-89/2E – Low cycle fatigue of welded structures (1989-12-31)

Location: Delft University
Person: G. J. Vegte / J. de Back / J. Wardenier
Language: English

7G-89/13E Investigation into the behaviour of Hollow Sections used (1989-12-31)

Location: Bochum University
Person: K. D. Behtau / K. Roik
Language: English

7E – Fatigue strength of welded T and Y type joints in RHS (1989-12-31)

Location: Testing Centre in Europe
Person: See 7F
Language: See 7F

7D/84/22 Residual stresses in Welded Hollow Section Joints and their effect on the fatigue behaviour (1984-12-31)

Location: Karlsruhe
Person: F. Mang
Language: English

7Bg-81/12 Fatigue strength of tubular structures with N joints in (1981-12-31)

Location: Sumimoto
Person: K. Nishioka / S. Sakamoto / F. Ohtake / K. Okuto
Language: English

7C-81/17 Fatigue strength of RHS joints with local reinforcements (1981-12-31)

Location: Karlsruhe University
Person:
Language: English

7A-81_(EUR 7401) – (Part 1 & 2) – Fatigue strength of Welded Joints (1981-12-31)

Location: Delft University
Person: C. Noordhoek / J. Wardenier / D. Dutta
Language: English

7A-81 Fatigue of Welded Rectangular Hollow Section Lattice Joints (1981-12-31)

Location: British Steel Corporation Research & Development
Person: –
Language: English

7A-80 (Section 1) Circular Hollow Section Joints Fatigue Behaviour (1980-12-31)

Location: Delft University
Person: C. Noordhoek / J. Wardenier / D. Dutta
Language: German

7A-80/13 (3 parts) Fatigue strength of welded SHS joints – monograph (1980-12-31)

Location: Karlsruhe-Liege-Corby-Delft
Person: –
Language: English

7B-80/16 Fatigue strength of overlapping CHS N joints (1980-12-31)

Location: Sumimoto
Person: K. Nishioka / S. Sakamoto / F. Ohtake
Language: English

8H-13/10, Tubular braces under seismic loading (2011-07-01)

Location: University of Toronto
Person: J.A. Packer
Language: English

8G-10/06 Slotted end connections to hollow sections (2006-10-01)

Location: University of Toronto, Canada
Person: G. Martinez-Saucedo / J. A. Packer
Language: English

8F-10/02 Pole splices using stainless steel nails (2002-12-31)

Location: University of Toronto
Person: M. Lecce / J. A. Packer
Language: English

8D/8E-9/02 Bolted Connections for RHS Tension Members (2002-12-31)

Location: Karlsruhe and Toronto University
Person:
Language: English

8D-10/00 Bolted flange-plate connections for RHS tension members (2000-12-31)

Location: Toronto University
Person: combined with 8E
Language: combined with 8E

8C-85/10 – Bolted Tension Flanges Joining Square Hollow Section Members: Bolted at 2 sides of Flange (1985-12-31)

Location: Tokyo University
Person: B. Kato / A. Mukai
Language: English

8C-84/6E Bolted Tension Flanges Joining Circular Hollow Section Members (1984-12-31)

Location: Tokyo University
Person: B. Kato / R. Hirose
Language: English

8B-82/3 Bolted Tension Flanges Joining Square Hollow Section Members (1982-12-31)

Location: Tokyo University
Person: B. Kato / A. Mukai
Language: English

8A-81/7 Investigation of bolted flange connections with SHS members (1981-12-31)

Location: Karlsruhe University
Person: F. Mang
Language: English

(8)-TR9/74 Additional – The Behaviour of Square and Triangular Blank Flanges in Bolted Joints in Tension (1974-12-31)

Location: Karlsruhe University
Person: Cardiff University/College
Language: English

(8)-CE67/22/74 – Bolted Tension Flange Joint Research – Ring Flanges Jointing CHS (1974-12-31)

Location: British Steel Corporation
Person:
Language: English

(8)-TR8/73 Additional – The Behaviour of Blank Flanges in Bolted Joints in Tension (1973-12-31)

Location: Cardiff University/College
Person: D. W. Griffiths
Language: English

(8)-TR4/70 Additional – The Behaviour of Bolted Flanged Joints in Tension – Ring Flanges (1970-12-31)

Location: Cardiff University/College
Person: K. C. Rockey / D. W. Griffiths
Language: English

(8)-TR10/74 Additional – Tensile Test Results of the Flanges of Bolted Joints in Tubular Members (1970-12-31)

Location: Cardiff University/College
Person: D. W. Griffiths
Language: English

9A/825/E Drag Measurements of Tubular Structure Elements English Translation (1982-12-31)

Location: DF VLR Nr Cologne
Person: G. Schulz / F. Hayn
Language: English

9D-84/21 Wind Forces on Square Sections with Various Corner Radii (1981-12-31)

Location: DF VLR Nr.Cologne
Person: A. Richter / D. Dutta
Language: English

9D-79/15 Wind tunnel tests with Square Hollow Sections presenting a range of Corner Radii (1979-12-31)

Location: DF VLR Nr.Cologne
Person: K. Wichmann / D. Dutta
Language: English

9C-73/10 Revision of Monograph 3 (Wind loads) (1973-12-31)

Location: DF VLR Nr.Cologne
Person: G. Schulz
Language: German

9C-73/10 Calculation of Wind Loads on Lattice Structures composed of Tubular Members (1973-12-31)

Location: DF VLR Nr.Cologne
Person: Dr. Schulz
Language: English

9C-72/21 Revision of Monograph 3 (Windloads) (1972-12-31)

Location: DF VLR Nr Cologne
Person: G. Schulz
Language: German

9B-72/14 Measurements over a wide range of Reynolds of the Wind Forces on Models of Lattice Frameworks with Tubular Members (1972-12-31)

Location: NPL, Teddington
Person: R. W. F. Gould / W. G. Raymer
Language: English

9A-69/21 Wind tunnel tests (1970-12-31)

Location: DF VLR Nr Cologne
Person: G. Schulz
Language: German

9A/507 Trans Drag Measurements on Tubular Structure Elements (1970-12-31)

Location: DF VLR Nr. Cologne
Person: F. Hayn
Language: English

9A/506 Drag Measurements on Tubular Structure Elements Part 1; Tubes and Two-Dimensional Tubular Joints (1970-12-31)

Location: DVL
Person: G. Schulz / F. Hayn
Language: English

10B-78/3 Internal resistance to corrosion in steel hollow sections (2002-12-31)

Location: Translation/Corby
Person: M. Tournay
Language: English

10A – note – Protection against corrosion Galvanising External Surface only of Tubes (1978-12-31)

Location: Corby
Person: C. Dawson
Language: English

10B-78/3 Verification of absence of corrosion (1978-12-31)

Location: CSFTA Paris
Person: M. Tournay
Language: French

11D-89/15 PART III – A Floor Construction with Rectangular Hollow Section Beams for offshore Structures (1989-12-31)

Location: Delft University
Person: J. H. Reusink / A. Aantjes / P. G. F. Bosman / J. Wardenier
Language: English

11D-89/15 PART II – A Deck Construction made with Rectangular Hollow Section beams for Offshore Structures (1989-12-31)

Location: Delft University
Person: P. G. F. Bosman / A. Auntjes / A. M. Gresnigt / J. Wardenier
Language: English

11D-89/15 PART IV A Floor Construction with Rectangular Hollow Section Beams for offshore Structures (1989-12-31)

Location: Delft University
Person: R. S. Puthli / J. H. Reasint / J. Wardenier
Language: English

11D-89/15 PART I – A Deck Construction made with Rectangular Hollow Section beams for Offshore Structures (1989-12-31)

Location: Delft University
Person: P. G. F. Bosman / A. Auntjes / A. M. Gresnigt / J. Wardenier
Language: English

11C-88/14 Minimum bending radii for square and Rectangular Hollow Sections (1988-12-31)

Location: Windsor University
Person: J. B. Kennedy
Language: English

11Bt-85/2 Cold bending of large size (100 mm and over) rectangular and square HSS – Theoretical aspects (1985-12-31)

Location: Windsor University
Person: J. B. Kennedy / M. M. Seddeik
Language: English

11A-79/18 Plastic behaviour of Hollow Structural Sections – Critical Buckling Strains of Round Tube in Flexure – The behaviour of SHS with implication (1979-12-31)

Location: McMaster University
Person: R. M. Korol / J. Hudoba
Language: English

11B-78/12 Determination of Minimum Radii for Cold Bending of Square and Rectangular Hollow Structural Sections (1978-12-31)

Location: Windsor University
Person: F. S. Brady
Language: English / French

12A-70/34E Investigation of space structure joints (1970-12-31)

Location: Belgium
Person: S. Baar / M. Raskin
Language: English

14B-10/07, Monograph on Hot-Dip galvanized tubular structures: Design recommendations for holes needed due to galvanization process (2007-08-31)

Location: University of the Bask Country
Person: B. Calleja, P. Landa, P. Landa, G. Iglesias
Language: English

15S-13/09, The robustness of joints between steel beams and concrete filled tubular (CFT) columns under fire conditions (2009-05-31)

Location: University of Manchester
Person: Y.C. Wang
Language: English

15Q-12/03 Improvement and extension of the simple Calculation Method for Fire Resistance of an unprotected Concrete Filled Hollow Columns (2003-12-31)

Location: CTICM
Person: C. Renaud / D. Joyeux / J. Kruppa
Language: English

15R _PROPOSAL 02.P7 – Unprotected Concrete Filled Columns Fire Tests – Verification of 15Q (2002-12-31)

Location: CTICM
Person: C. Renaud / D. Joyeux / J. Kruppa
Language: English

15R_INTERIM 1 – Unprotected Concrete Filled Columns Fire Tests – Verification of 15Q (2001-12-31)

Location: CTICM
Person: C. Renaud / D. Joyeux
Language: English

15P-12/00 Fire resistance of hollow sections filled with high strength concrete (2000-12-31)

Location: Hosser, Hass & Partner
Person: R.Hass / J.Ameler / H. Zies
Language: English

15Q Part 1 – Axially Loaded Columns (1999-12-31)

Location: CTICM
Person: C. Renaud / B. Zhao / J. Kruppa
Language: English

15QPart 2 – Eccentrically Loaded Columns (1999-12-31)

Location: CTICM
Person: C. Renaud / D. Joyeux
Language: English

15N-96 Micro-comptuer Software for the generalised fire design of unprotected concrete-filled (UCF) SHS columns (1996-12-31)

Location: CTICM and TNO
Person: L. Twilt / J. Kruppa / C. Both / G. Tabet
Language: English

15C1-95 Fire resistance of composite columns using unprotected hollow sections (1995-12-31)

Location: Braunschweig University
Person: J. Stanke
Language: German

15 K – CIDECT design guide on the fire resistance of HSS columns (1994-12-31)

Location: Design Guide Published 1994
Person: L. Twilt, W. Klingsch, R. Hass
Language: Design Guide Published 1994

15H-21/91E – Fire Tests on Cleat Connections to Concrete Filled RHS Columns (1st & 2nd Phase Tests) (1991-12-31)

Location: Warrington Fire Research Station
Person: M. Edwards
Language: English

15L-23/91 Reinforcement of concrete by steel fibres in composite columns; simplified manufacture and defined fire resistance (1991-12-31)

Location: –
Person: R. Hass / D. Dutta
Language: English

15H-90/15E – Fire Tests on Cleat Connections to Concrete Filled RHS Columns (1st & 2nd Phase Tests) (1990-12-31)

Location: Warrington Fire Research Station
Person: –
Language: English

15G-89/3 Fire Resistance of Hollow Section Composite Columns of Small Cross sections (1989-12-31)

Location: Wuppertal University
Person: K. G. Wurker / W. Klingsch
Language: English

15 ? -89/7-E – Fire resistant connections between concrete filled hollow sections and composite steel/concrete beams (1989-12-31)

Location: Berlin University
Person: D. Hass / W Klingsch
Language: English

15J-88/12 Design Charts for the Fire Resistance of Concrete Filled HSS Columns under centric Loading (1988-12-31)

Location: IBBC-TNO
Person: L. Twilt
Language: English

15F-86/7 Harmonisation of the calculation rules for the fire resistance of Concrete Filled HSS Columns (1986-12-31)

Location: Tech centre for Fire Prevention
Person: L. Twilt / P. W. Haar
Language: English

15C1/C2-83/27 Fire resistance of concrete filled hollow sections (without external protection) (1983-12-31)

Location: Braunschweig University
Person: K. Kardina / W. Klingsch
Language: English

15B-15C-83/6 Fire stability of concrete filled hollow section columns (1983-12-31)

Location: Cannes France
Person: J. P. Grimault
Language: English

15D-81/10 Fire behaviour of external hollow section columns (1981-12-31)

Location: Maizière lès Metz
Person: J. P. Grimault
Language: English

15B-80/10 Determination of the fire life of concrete filled hollow sections CSTB (1980-12-31)

Location: Boreham Wood-CTICM
Person: G. Grandjean / J. P. Grimault / L. Petit
Language: French

15A-76/36 Fire protection tests on concrete filled columns (1976-12-31)

Location: France
Person: –
Language: French